In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Be sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you’re done, so you don’t http://caohoc.com.vn/the-best-cheap-dog-food-finding-the-right-type-of-inexpensive-dog-food.html end up with smudges or smears on your dog.
Then it is time to paste the mask onto your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are flat and make sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you’ll need to do some sanding to make sure that it’s secure on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.